Table of Contents
Advertisement
•
Transparent channel
Use the RS485 serial port to achieve transparent data transmission with the third-party device.
Transparent channel is mainly used to achieve transparent data transmission between two devices.
NOTE!
1.
This function is not supported by some models. Please see the actual model for
details.
2.
Make sure that you have set Port Mode to Trans-Channel for your camera.
1.
Click Setup>System>Ports & Devices, and then click the Serial Port tab.
2.
Select Trans-Channel from the Port Mode drop-down list.
3.
Select Enable for Trans-Channel.
4.
Enter the destination IP address and port number (IP address and port number that the
transparent channel connects to).
5.
Click Save.
UNI IP Series Network Cameras – H265, 2MP / 5MP
127
Advertisement
Table of Contents
