Table of Contents
Advertisement
7.5.1.6 Object Left
Detect objects left behind in the specified area and trigger alarms.
Click Setup>Intelligent>Smart. Choose Object Left and then click
1.
Select Enable Object Left Detection.
2.
In the Detection Rule area, click
3.
Drag the box to set the position and effective range.
4.
Set time threshold and sensitivity to decide whether to report an intrusion detection alarm.
•
Time threshold: Minimum duration an object is detected in the specified area to trigger an
alarm.
•
Sensitivity: The greater the number, the higher the sensitivity. An alarm is reported if an
object is detected in the specified area for the specified length of time.
5.
Set the alarm-triggered actions and arming schedule as required. For the detailed steps, see
the descriptions of alarm-triggered actions in 7.6.2 Common Alarm Configuration.
6.
Click Save.
UNI IP Series Network Cameras – H265, 2MP / 5MP
to add a detection area. To delete, click
81
.
.
Advertisement
Table of Contents
