EverFocus UNI IP Series User Manual page 128

7.8.2.3 APR Protection
This function protects a camera from ARP attacks. The gateway and the MAC address must be set
properly before a PC can access the camera from another network; if an incorrect MAC is set, only PCs
on the same LAN can access.
Click Setup>Security> Network Security> ARP Protection.
Select the check box to enable the ARP binding function and set the gateway MAC address.
Click Save.
7.8.2.4 IP Address Filtering
Use IP address filtering to allow or forbid access from specified IP address(es).
NOTE!
This function is not supported by some models. Please see the actual model for details.
Click Setup>Security > Network Security>IP Address Filtering.
Select On to enable IP address filtering.
Select a filtering mode, and then add IP address(es).
Click Save.
UNI IP Series Network Cameras – H265, 2MP / 5MP
121