Table of Contents
Advertisement
7.5.1.7 Mixed -Traffic Detection
Mixed-traffic detection detects motor vehicles, non-motor vehicles, and pedestrians in configured area.
NOTE!
1. Only some camera models support this function, and the actual interface may vary.
2. The supported alarm triggering and arming schedule may vary with camera model. Please
see the actual Web interface for details.
3. The camera takes the snapshot and sends the snapshot to the back end.
Click Setup > Intelligent > Smart. Choose Mixed-Traffic Detection, and then click
1.
Choose Full Screen or Specified Area as detection area.
2.
Set snapshot sensitivity. The greater the value, the higher the sensitivity.
3.
Set snapshot object type to judge whether to snap small pictures.
4.
Set object filter type and size, alarm-triggered actions and arming schedule as required.
Set the alarm-triggered actions and arming schedule as required. For the detailed steps, see
5.
the descriptions of alarm-triggered actions in
6.
Click Save.
UNI IP Series Network Cameras – H265, 2MP / 5MP
7.6.2 Common Alarm Configuration.
82
.
Advertisement
Table of Contents
