Table of Contents
Advertisement
7.5.1.10
People Counting
NOTE!
1. Only some camera models support this function.
2. The supported alarm triggering and arming schedule may vary with camera model. Please
see the actual Web interface for details.
Click Setup >Intelligent>Smart. Choose People Counting and then click
1.
Select Enable Passenger Flow Detection. Select a detection mode, set report interval and
sensitivity.
2.
Click Draw Detection Area, and then draw a detection area on the preview window on the left,
e.g., a square.
3.
Click Draw Entrance Direction, and then draw the direction on the preview window on the left.
The direction is usually vertical or sloping.
UNI IP Series Network Cameras – H265, 2MP / 5MP
87
.
Advertisement
Table of Contents
