Table of Contents
Advertisement
12. Repeat the last two steps to add other marking points. You may need 5~12 marking points depending
on your needs. Click Finish after marking is completed. For some camera models, you need to
complete the marking of several scenes.
7.5.1.16
Attribute Collection
NOTE!
Attribute collection functions with other smart features.
To display attributes in live view page, you need to enable Display Attribute in Local Parameters first.
The interface may vary with model and smart function. Please see the actual interface for details.
1.
Click Setup > Intelligent > Smart Settings, and choose Attribute Collection.
2.
Select the attributes to collect under each attribute category.
3.
Click Save.
Master-Slave Linkage: Use master-slave linkage to link a master device and a slave device. The master
device detects the target and the linked slave device tracks and captures the target.
7.5.1.17
Monitor by Attribute
UNI IP Series Network Cameras – H265, 2MP / 5MP
98
Advertisement
Table of Contents
