Table of Contents
Advertisement
7.9 System
7.9.1
Time
You can use the following methods to adjust the system time of your device.
•
Manually Setting or Synchronizing the System Time
Click Setup>System>Time, and then click the Time tab.
1.
Select a synchronization mode.
2.
Set the correct time zone and system time. You may also click Sync with Computer Time to
synchronize the time settings of your camera with that of your PC.
3.
Click Save.
•
Synchronizing with the NTP Server
Click Setup>System>Time, and then click the Time tab.
1.
Set Sync Mode to Sync with NTP Server, and then set the IP address and port of the NTP server and
update interval.
2.
Click Save. The camera will periodically synchronize time with the NTP server.
•
Setting the DST
Click Setup>System>Time, and then click the DST tab.
1.
Select On for DST, set the start time, end time, and DST bias.
2.
Click Save.
UNI IP Series Network Cameras – H265, 2MP / 5MP
123
Advertisement
Table of Contents
