Table of Contents
Advertisement
•
OSD
To display information from the third-party device on the OSD, you need to select OSD as the port mode.
The camera receives information from the third-party device through the RS485 serial port, translates
the received information, and then displays it on the OSD.
NOTE!
To enable the camera to correctly translate information received from the third-party device,
make sure that the information sent by the third-party device through the serial port complies
with the data format specified by our company. For more details, contact your dealer.
1.
Click Setup>System>Ports & Devices, and then click the Serial Port tab.
2.
Select OSD from the Port Mode drop-down list. Select Enable OSD Report (so OSD data will be
uploaded to the platform).
3.
Click Save.
•
ONVIF Transparent Channel
Transmit data through the transparent channel (ONVIF) between the camera's RS485 port and a
third-party device.
1.
Click Setup>System>Ports & Devices, and then click the Serial Port tab.
2.
Set Port Mode to Select Trans-Channel via ONVIF.
3.
Click Save.
UNI IP Series Network Cameras – H265, 2MP / 5MP
128
Advertisement
Table of Contents
