Table of Contents
Advertisement
7.6.2.4
Alarm Input
The camera can receive alarm information from a third-party device. To use this function, you need to
configure the following information for alarm input first: port, alarm name, alarm type (normally open or
normally closed) and alarm reporting time.
NOTE!
1. This function is not supported by some models. Please see the actual model for details.
2. The alarm triggered actions may vary with models. Please see the actual Web interface for
details.
Click Setup>Events>Common Alarm >Alarm Input.
1.
Select alarm and set the alarm name.
2.
Select N.O. or N.C. according to the type of the third-party alarm input device. For example, if
the third-party alarm input device is normally open, you need to select N.O. here, so that the
camera can receive alarm information from the third-party alarm input device.
3.
Set actions to be triggered by an input alarm and the plan. For the detailed steps, see the
descriptions of alarm-triggered actions in 7.6.2 Configuring Motion Detection Alarm.
4.
Click Save.
UNI IP Series Network Cameras – H265, 2MP / 5MP
109
Advertisement
Table of Contents
