Video; Video Stream - EverFocus EPN5230 User Manual

7.2

Video

You can configure settings relating to video such as streaming, camera OSD, Privacy Mask, Focus /
Zoom and Image on this page. Click the tab of the one you want to see.

7.2.1. Video Stream

This IP camera can output two video streams simultaneously. For each of these streams, you can set
the resolution, frame rate, quality, profile, GOP, rate control and video codec individually.
Note: If you connect to the camera via the Internet and experience a delay (lag time) in the video
feed, try to reduce the quality and resolution of the streams – but keep the frame rate at its
maximum.
Resolution: Select the most suitable resolution for your needs.
Frame Rate: Enter the desired frame rate, from 1 to 30 fps.
Quality: Enter the desired front end devices video coding quality, from 1 to 100.
Profile: Select the video coding level from High, Base or Main.
GOP: Enter the GOP (Group of pictures) value, from 1 to 50.
Rate Control: If required, select whether you want the stream to stream a CBR (Constant Bit Rate) or a
VBR (Variable Bit Rate), and set the values of whichever option you choose.
Video Codec: Select the video compression format. The camera currently only supports H.264.
Click the Save button on the bottom-right to save the settings.
41
EPN5230 / EPN5210