EverFocus UNI IP Series User Manual page 91

NOTE!
1. If Counting is disabled, counting direction setting will not show.
2. After enabling Counting, select Enter or Leave according to the direction of your camera.
3. The camera can send the counting statistics to managing platform.
6. Set minimum pupillary distance. Click Draw and then draw in the left live view window.
7. Enable face overlay, then a box will be added to the detected faces in the snapshot.
8. Click Clear Counting Result to clear statistics.
9. Configure face selection as required. The following table describes some major parameters:
Item
Effect Priority: The camera selects snapshots with best image quality from the
•
captured. You can set the number of photos to select.
Speed Priority: The camera selects the optimal snapshots from the moment that the
•
face is detected till Selection Timeout is up. You can set the number of photos to
Selection
select.
Mode
Periodic Selection: The camera selects a snapshot in every selection period. For
•
example, if Selection Period is set to 500ms, the camera selects a face snapshot
every 500ms, and if Upload Original Image is selected, both the original snapshot
containing the face and the face cutout will be uploaded.
10. Set the alarm-triggered actions and arming schedule as required. For the detailed steps, see the
descriptions of alarm-triggered actions in 7.6.2 Common Alarm Configuration.
11. Click Save.
UNI IP Series Network Cameras – H265, 2MP / 5MP
Description
84