7.5.1.13
Defocus Detection
NOTE!
1. Only some camera models support this function.
2. The supported alarm triggering and arming schedule may vary with camera model. Please
see the actual Web interface for details.
Use defocus detection to detect defocus of the camera and to report an alarm when such an event is
detected.
Click Setup >Intelligent>Smart. Choose Defocus and then click
1.
Select Defocus Detection.
2.
Set the alarm-triggered actions and arming schedule as required. For the detailed steps, see
the descriptions of alarm-triggered actions in 7.6.2 Common Alarm Configuration.
3.
Click Save.
UNI IP Series Network Cameras – H265, 2MP / 5MP
90
.