Common Alarm - EverFocus UNI IP Series User Manual

c. Set environment temperature. Modify the environment temperature according to the actual
environment temperature on site.
NOTE!
The black body temperature is 36℃ by default. After power on, when the green value (set

temperature) and the red value (actual temperature) on the back panel of the black body are
both displayed steadily as 36.00, it means that the black body is operating normally.
The black body should be kept facing the camera.

The correction temperature function can compensate for the body surface temperature to

avoid inaccurate temperature measurement data caused by excessive temperature
difference in the practical application environment.
7.6.2

Common Alarm

You can schedule alarm reporting and set actions that can be triggered by other devices so that alarms
and the triggered actions can be handled in time.
Alarm reporting can be scheduled for motion detection alarm, alarm input, alarm output, tampering
detection alarm, and audio detection alarm. The supported alarms may vary with device model. For the
alarm types that your camera supports, see the Web interface.
The following table describes the major alarm-triggered actions and how to set a plan.
Item
Select the check box. This setting is the alarm output interface linked to motion
detection alarm.
Alarm Output
Note:
When an alarm is reported, the camera triggers alarm output so as to trigger actions by
a third-party device.
Select the check box and set the preset linked to motion detection alarm.
Note:

Goto Preset

With Upload to FTP selected, the camera will automatically upload snapshots to the
specified FTP server when an alarm is triggered.
Upload to FTP
Note:
Make sure you have completed FTP and Snapshot before using this function.
Recording
With Recording selected, the camera will automatically record video when an alarm is
Make sure you have set presets. Otherwise, you cannot set this parameter. For
details about how to set a preset, see Setting Presets.
When an alarm is reported, the PTZ camera automatically goes to the preset to
capture video in the correct scene.
UNI IP Series Network Cameras – H265, 2MP / 5MP
Description
101