Table of Contents
Advertisement
7.5.1.8 Face Detection
Face detection detects faces in the configured area.
NOTE!
1. Only some camera models support this function, and the actual interface may vary.
2. The supported alarm triggering and arming schedule may vary with camera model. Please
see the actual Web interface for details.
3. The camera takes the snapshot and sends the snapshot to the back end, which will compare
the data with that in the database.
Click Setup > Intelligent > Smart. Choose Face, and then click
1.
Choose Full Screen or Specified Area as detection area.
2.
Set snapshot sensitivity. The greater the value, the higher the sensitivity.
3.
Set snapshot mode. In Intelligent Recognition, the camera detects and snapshots the object
automatically.
4.
To enable snapshot of human body in the detection area, enable Human Body Snapshot.
5.
Set face counting direction. The counting results including people left and people entered statistics
appear on live view. You need to select People Counting in OSD settings. Refer to "OSD Setting" for
details.
UNI IP Series Network Cameras – H265, 2MP / 5MP
.
83
Advertisement
Table of Contents
