EverFocus UNI IP Series User Manual page 60

Parameter
Note:
To ensure image quality, note that the frame rate should not be greater than the
reciprocal of shutter speed.
CBR: Constant Bit Rate, which means that the camera transmits data at a constant
data rate.
Bitrate Type
VBR: Variable Bit Rate, which means that the camera adjusts the bit rate dynamically
according to image quality.
When Encoding Mode is VBR, you can move the slider to adjust quality level for
images. Moving the slider toward Bit Rate decreases the bit rate and may affect
Image Quality
image quality. Moving the slider toward Quality increases the bit rate and improves
image quality.
Interval at which an I frame is encoded. Normally, a shorter I frame interval offers
I Frame Interval
better image quality but consumes more bandwidth.
Group Of Pictures in MPEG video encoding. This parameter specifies the order in
GOP
which intra-frames (I frame) and inter-frames are arranged.
SVC (Scalable Video Coding) can reduce storage without compromising playback
SVC
quality.
Basic Mode: The actual bit rate is around 3/4 of the set bit rate.
Advanced Mode: The actual bit rate is around 1/2 of the set bit rate.
Note:
U-Code
When U-Code is enabled, video compression only supports H.264 and H.265.

MJPEG is not supported.
When U-Code is enabled, the capture mode does not support frame rateshigher

than 30.
Set the extent of smoothing. Choosing Clear means disabling Smoothing. Moving the
slider toward Smooth increases the level of smoothing but will affect image quality.
Smoothing
Note:
In a poor network environment, you can enable smoothing to get more fluent video.
BNC Output BNC output supports NTSC and PAL.
Click Save.
UNI IP Series Network Cameras – H265, 2MP / 5MP
Description
53