Video & Audio; Video - EverFocus UNI IP Series User Manual

7.3 Video & Audio
7.3.1

Video

You can set video parameters that your camera supports and view the current status of BNC output. If
available, you may also enable sub-stream and third stream as required.
!
NOTE
1. This function may vary with models. Only some camera models support the third stream. To
determine if your camera supports this function, see the Web interface.
After enabling the sub or third stream, modify the parameters as required. The parameters
2.
for the sub and third stream have the same meanings as that for the main stream.
Modify the settings as required. The following table describes some major parameters.
Parameter
Video
Compression
Frame Rate
Three options: H.265, H.264 and MJPEG.
Note:
Image Quality cannot be set when Video Compression is set to H.265 or H.264.

When set to MJPEG, only three frame rates are available: 1, 3 and 5; and Bit Rate, I
Frame Interval, Smoothing and U-Code cannot be set.
The bit rate changes to the default when you change the setting between H.264

and H.265. The default bit rate for H.265 is half of that for H.264.
Frame rate for encoding images. Unit: FPS (frame per second).
UNI IP Series Network Cameras – H265, 2MP / 5MP
Description
52