Table of Contents
Advertisement
7.2.8 802.1x
802.1x provides authentication to devices (e.g., cameras) trying to connect to a network. Only the
authenticated devices can connect the network. This enhances security.
Select On and then complete other settings.
Click Save.
7.2.9 Qos
QoS(Quality of Service) is the ability to provide better service for specified network communication. As a
network security mechanism, QoS is used to address problems like network delay and blocking. When
the network is overloaded or congested, QoS ensures that critical services are not delayed or discarded
and that the network runs efficiently.
1.
Set a priority level (0~63) for each service. At present, QoS allows you to assign different priority to
audio and video, alarm report, configuration management and FTP transmission. The greater the
value, the higher the priority. For example, if the value of audio and video is set to 60, alarm report
and configuration management is set to 0, and FTP is set to 4, when network congestion occurs, the
priority is to ensure the smooth running of audio and video.
2.
Click Save.
NOTE! To use QoS, make sure that the switch support QoS mode.
UNI IP Series Network Cameras – H265, 2MP / 5MP
51
Advertisement
Table of Contents
