Table of Contents
Advertisement
1.
Select Cross Line Detection.
2.
In the Detection Rule area, click
click
.
3.
On the small preview window, drag the line to the intended position and set the detection
range.
4.
Set the direction and sensitivity for the camera to decide whether to report a cross line
detection alarm.
5.
Set the priority of detection to judge the trigger sequence when detection rules are triggered
at the same time.
6.
Set snapshot object type to judge whether to snap small pictures
7.
Set object filter type and size, alarm-triggered actions and arming schedule as required.
8.
Set the alarm-triggered actions and arming schedule as required. For the detailed steps, see
the descriptions of alarm-triggered actions in 7.6.2 Common Alarm Configuration.
9.
Click Save.
UNI IP Series Network Cameras – H265, 2MP / 5MP
to add a new detection area. To delete a detection area,
76
Advertisement
Table of Contents
