Table of Contents
Advertisement
5.5 PTZ Limit
Set rotation limits to prevent the PTZ camera from hitting obstacles such as a wall.
NOTE!
This function is only supported by some PTZ cameras.
1.
Click Setup>PTZ>PTZ Limit.
2.
Use directional buttons to rotate the camera to an intended position.
3.
Click
to set the current position as a limit. For example, click
Clicking
will rotate the camera to the current position if the direction has been changed.
4.
Repeat the above steps to set all limits as needed (up, down, left, right).
5.
Click Save.
6.
Click Start PTZ Limit to apply the setting.
7.
Click
to delete settings and reset the limit.
5.6 Resume Patrol
1.
Click Setup>PTZ>Patrol.
2.
Set the time when patrol resumes.
3.
Click Save.
UNI IP Series Network Cameras – H265, 2MP / 5MP
on the top to set the upper limit.
35
Advertisement
Table of Contents
