EverFocus UNI IP Series User Manual page 48

Modify the settings as required. The following table describes some major parameters.
Parameter
triggered Target
Intelligent Mark
Smart
Display
Attributes
Processing
Mode
Video
Protocol
Recording
Record
and
Record
Snapshot
Overwrite
Files Folder
Click Save to save the configuration.
When enabled, the camera will display an on-screen mark on the target
(e.g., face when face detection is enabled) and track it.
This function should be used with"Cross Line Detection、Enter Area、
Leave Area、Intrusion Detection、Mixed -Traffic Detection"
When enabled, the attributes collected will be displayed in live view
page. This function should be used with Intelligent > Smart > Attribute
Collection.
Real-Time Priority: Recommended if the network is in good condition.
Fluency Priority: Recommended if you want short time lag for live video.
Ultra-Low Delay: Recommended if you want the minimum time lag for
live video.
Set the protocol used to transmit media streams to be decoded by the
PC.
Subsection By Time: Duration of recorded video for each recording file on
the computer. For example, 2 minutes.
Subsection By Size: Size of each recording file stored on the computer.
For example, 5M.
Overwrite: When the assigned storage space on the computer is used up,
the camera deletes the existing recording files to make room for the new
recording file.
Full Stop: When the assigned storage space on the computer is full,
recording stops automatically.
The save path of snapshots and recordings. The max. path length is 260
bytes. If the limit is exceeded, recording or snapshot during live view will
fail, and messages will appear on the screen.
41
UNI IP Series Network Cameras – H265, 2MP / 5MP
Description