Table of Contents
Advertisement
3.3.5 Deep Perimeter Snapshot
NOTE!
Only some camera models support this function, and the actual interface may vary.
1.
In live view page, click
2.
To display structured data of detection objects in live view page, you need to select Attribute
Collection in Common Alarm Configuration. The following figure shows an example.
3.
Click
to stop deep perimeter snapshot display.
4.
Click Open Image Folder to view the snapshots saved in your PC. The snapshots are saved in JPEG
format. You may also change the image path in Setup > Common > Local Parameters. When the disk
space is smaller than 100MB, you will be prompted to clear auto snapshot folder, and new snapshots
will not be displayed in live view page until disk space is freed.
in the tool bar.
16
UNI IP Series Network Cameras – H265, 2MP / 5MP
Advertisement
Table of Contents
