Security; User - EverFocus UNI IP Series User Manual

7.8 Security

7.8.1

User

There are two types of users in the system:
Administrator: referred to as "admin" in this manual. The default name of the administrator

is admin, which cannot be modified. Admin has full permission and can manage all users and
devices. Only one admin user is allowed in the system.
Common user: referred to as "user" in this manual. User only has permission to play live and

recorded video. Up to 32common users are allowed in the system.
You can add a user on the user management interface(under Setup>Security> User).

After the user is added successfully, you can change the password by entering the new

password or delete the user by clearing the username.
On the first login, you need to enter an email address, which will be used to reset the login

password in case you forget it. You may deselect the check box and choose not to enter any
email address.
To reset the password, click Forgot Password on the login page and follow instructions to get

a security code. Use the security code to reset the password.
Select Setup>Security>User, edit admin information including the email address.

NOTE!
1. Only admin can change passwords. Changing the username or password for a user
when the user is still logged in will force the user to log out. The user must use the
new username or password to log in.
2. Only admin can add and delete users. Deleting a user when the user is still logged in
will force the user to log out. A deleted user cannot log in.
UNI IP Series Network Cameras – H265, 2MP / 5MP
119