Ptz Control; Ptz Control Toolbar - EverFocus UNI IP Series User Manual

5 PTZ Control

This function is available only for the PTZ dome cameras or a box camera installed on a Pan/Tilt motor.
NOTE!
1. Some of the lens control functions are applicable to cameras equipped with motorized lens.
2.
The PTZ control buttons may vary with camera model. For the PTZ control buttons that your
camera supports, see the Web interface.

5.1 PTZ Control Toolbar

Item
Preset
Patrol
/
/
/
/
Select a preset and then click
To add a preset, click
Select a patrol route and then click
To edit a patrol route, click

To add a patrol route, click

To delete a patrol route, click

Adjust the moving speed of the PTZ camera.
Control the direction of the PTZ camera and release the control.
Turn on or off IR.
Turn on or off the wiper.
Turn on or off the heater.
Turn on or off the illuminator.
Turn on or off snow control.
26
UNI IP Series Network Cameras – H265, 2MP / 5MP
Description
. The PTZ camera goes to the selected preset.
. To delete a preset, click
to start patrol.
.
.
.
.