Table of Contents
Advertisement
7.9.2
Server
You need to configure the intelligent server if an ultra sensitive camera is managed by a central server.
NOTE!
1.
Only some camera models support intelligent server.
2.
The settings may vary with device model.
3.
To use face snapshot, you need to configure the TMS server to which snapshots are
uploaded.
1.
Click Setup>Common>Server, and then click the Intelligent Server tab.
2.
Set intelligent server parameters. Main parameters are as follows.
Server IP, Server Port: use the default value.
Platform Communication Type:
a.
Choose GA/T1400, then enter device ID, username and password.
b.
Choose FTP, then click the FTP button to go to the FTP settings page and complete the
settings.
c.
Choose LAPI to connect to VMSes.
3.
Video & Image Database Settings: choose Pixel Mode or Percentage Mode to display the
coordinate information of detection objects.
UNI IP Series Network Cameras – H265, 2MP / 5MP
124
Advertisement
Table of Contents
