Table of Contents
Advertisement
Illumination Level
To restore the default settings, click Default.
•
Focus
NOTE!
This function may vary with models. Please see actual models for details.
Click Setup>Image>Image and then click Focus.
Select the focus mode as required.
Parameter
Auto Focus: The camera focuses automatically according to the current light condition.
Manual Focus: Manually adjust camera focus as required.
One-Click Focus: The camera is triggered to focus once when rotating, zooming or going
Focus Mode
to a preset.
One-Click Focus (IR): In a low light condition such as during night hours or in a dark
house, this focus mode achieves better effects with the IR light turned on.
Normal: Used for common scenes, such as road and industrial park.
Scene
Long Distance: Used for long-distance monitoring on a road .For example, when the
camera is installed over 30meters high to monitor a distant road intersection.
To restore the default settings, click Default
Set the intensity level of the IR light. The greater the value, the higher the intensity.
0 means that the IR light is turned off.
Near-illumination Level: You are recommended to set this parameter first for a
wide-angle scene.
Mid-illumination Level: You are recommended to set this parameter first if the
scene requires an intermediate focal length.
Far-illumination Level: You are recommended to set this parameter first if the scene
requires a telephoto view.
Note:
You can set this parameter only when Control Mode is set to Manual.
UNI IP Series Network Cameras – H265, 2MP / 5MP
Description
67
Advertisement
Table of Contents
