EverFocus UNI IP Series User Manual page 16

Button
/
/
/
/
/
Adjust the output volume for the media player on the PC.
Adjust the microphone volume on the PC during audio communication
between the PC and the camera.
Take a snapshot of the current image displayed on the PC.
Note:
The path for saving snapshots are setinSystem Configuration.
Start/stop local recording.
Note:
The path for saving local recordings is setinSystem Configuration.
Start/stop audio communication between the PC and the camera.
Start/stop digital zoom. For more details, see 3.3.1Using Digital Zoom.
Start/stop area focus. For more details, see 3.3.2Using Area Focus.
Start/stop 3D positioning. For more details, see 3.3.3Using 3D Positioning.
Show/hide the PTZ control panel.
Set image display ratio in the window. For example, to display
high-definition images at original 16:9, select Scale; to display according to
window size, select Stretch; to display with the original image size, select
Original.
Reset the packet loss rate to zero.
Note:
After you move the mouse cursor on a live view window, this button
appears on the floating toolbar.
Display packet loss rate and bit rate information at the bottom of the
window.
Note:
After you move the mouse cursor on a live view window, this button
appears on the floating toolbar.
Click this button to always display the information. With another click, the
information appears only when you move the mouse cursor over the
window or place it at the bottom. If the mouse cursor rests on the window
9
UNI IP Series Network Cameras – H265, 2MP / 5MP
Description