Related Manuals for EverFocus EAN600
Summary of Contents for EverFocus EAN600
- Page 1 EAN600 EAN600 User’s Manual V2.0 Copyright © EverFocus Electronics Corp, Release: May 2005...
- Page 2 (2) this device must accept any interference received, including interference that may cause undesired operation. EverFocus Electronics Corp. 12F, No. 79, Sec. 1, Shin-Tai Wu Rd., His-Chi, Taipei Hsien, Taiwan, R.O.C. EAN600 complies with BSMI, CE, FCC, UL, and class B of EMC.
-
Page 3: Table Of Contents
EAN600 TABLE OF CONTENTS TABLE OF CONTENTS ....................3 Introduction........................4 Terms and Trademarks ....................4 Accessories ........................5 Assembly Diagram.....................5 Important Safety Instructions..................6 Safety Precautions......................8 About the AC adaptor ....................12 Installation and Operation....................14 Setting up the Hardware connection................14 Software configuration: ...................15 1. Setup the IP address of your local PC..............15 2.Setting up the Browser. -
Page 4: Introduction
User's Guide, keep it in a convenient place for future reference. The design, specifications, software, and User's Guide contents are subject to change without prior notice. EAN600 A is designed for indoor-use only. Terms and Trademarks The term "OS"... -
Page 5: Accessories
EAN600 Accessories Confirm that all of the following accessories have been supplied with the network camera. Accessories : Network Camera (x1). Accessory packet(x1). Power cord (x1) Basic User's Guide (x1) Quick Start Guide (x1) Assembly Diagram... -
Page 6: Important Safety Instructions
EAN600 Important Safety Instructions When using this camera, always follow basic safety precautions to reduce the risk of fire, electric shock, or personal injury. 1. Read and understand all the instructions. 2. Keep the User’s Guide for future reference. 3. Heed all warnings. - Page 7 EAN600 WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Note: These limits are designed to provide reasonable protection. This equipment...
-
Page 8: Safety Precautions
EAN600 Safety Precautions Refer all work related to the installation of this product to qualified service personnel or system installers. Do not block the ventilation opening or slots on the cover. Do not drop metallic parts through slots This could permanently damage the appliance. - Page 9 EAN600 Do not overload outlets and extension cords as this may result in a risk of fire or electric shock. Do not operate the appliance beyond its specified temperature, humidity or power source ratings. Do not use the appliance in an extreme environment where high temperature or high humidity exists.
- Page 10 • EAN600 • User’s manual • Quick Installation Guide • Power Cord If an item appears to have been damaged in shipment, replace it properly in its carton and notify the shipper. If any items are missing, notify your Everfocus...
- Page 11 Save it for possible future use. Service If the unit ever needs repair service, the customer should contact the nearest Everfocus Electronics Corp. Service Center for return authorization and shipping instruction. Read Instruction---All the safety and operating instructions should be read before...
-
Page 12: About The Ac Adaptor
EAN600 manufacturer as they may cause hazards. Water and Moisture—Do not use this unit near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, near a swimming pool, in an unprotected outdoor installation, or any area which is classified as a wet location. - Page 13 EAN600 the AC adaptor jack. Do not insert the plug into other jacks as this may cause a malfunction. When removing the connection cable, disconnect the cable by holding its plug. Do not disconnect the cable by pulling on the cable.
-
Page 14: Installation And Operation
Setting up the Hardware connection. 1. Mount a lens to the camera. 2. Connect the EAN600 Network Camera to a PC with a ”Cross-Over” cat. 5 cable. Ethernet [RJ-45] Connect to your PC A “Y Cable” Connect to AC Adapter, Please pay attention to “+”... -
Page 15: Software Configuration
EAN600 Software configuration: Attention: Please install DirectX 9.0b or newer version first Note: Please connect to Microsoft’s Web Site for downloading: For example: (This web site may change without notices.) http://www.microsoft.com/downloads How to check the current version of DirectX was installed? Go to “Start”, “Run”, in command line: type “dxdiag”, in a Popup window, you... - Page 16 EAN600 Default Gateway: 192.168.1.1 Those setting are following Ethernet standard. You can fill any value numbers that you like, but have to follow Ethernet standard. After you into “Internet Protocol (TCP/IP) Properties” and you will see “Internet Protocol (TCP/IP) Properties” configuration at below.
-
Page 17: Setting Up The Browser
EAN600 2.Setting up the Browser. Please go to the “security” option of “Internet option” to confirm that in default setting. Start > Setting > Control Panel > Internet option > Security > Default Level button. After you click “Default Level” button, and IE browser will be default security... -
Page 18: Viewing The Live Video Steps
EAN600 3. Viewing the live video steps Step1. Please double click the icon of Internet Explorer. Step2. Please key in “http://192.168.1.100” on the URL bar. (address will be change by user) Step3. Select “admin” and key in “admin”. Step4. Please Click “Login” button Step5. - Page 19 EAN600 The screen shot of logged in as “admin”: The screen shot of logged in as “user”:...
- Page 20 EAN600 The screen shot of logged in as “guest”: In default setting, there are three different passwords for three different login user names: USER NAME PASSWORD admin admin user user guest guest You can see the red circular mark marks the disable function, which in user level...
-
Page 21: Detail Description Of Operation When Logged In As "Admin
EAN600 Detail Description Of Operation When Logged In As “Admin” “Play” and ”Pause”. Single Image Snapshot. A pop up window will appear and ask user to key-in the file name for saving this snapshot image. You can change the root, and file name. - Page 22 EAN600 8. File Length: Setting up the size of the file to be saved by assigning seconds. 9. Disk Space: Setting up the maximum hard disk space for saving the video files. If it reach the limitation or the hard disk is less than 500MB, it will loop through the beginning of the hard disk.
- Page 23 23. IP: Please enter new IP address for EAN600 if you want. 24. NetMask: Please enter new NetMask for EAN600 if you want. 25. Gateway: Please enter correct gateway’s IP address for EAN600 if you want. 26. Control Port: setting the control port, use this setting for configuring the Virtual Server on your network.
-
Page 24: Firmware Upgrade
EAN600, and please read this chapter before you do. What is CamTool Introduction: CamTool is the program we use to update the firmware of EAN600. Also it can detect how many EAN600 on the LAN. After running the utility, user will see Fig1:... - Page 25 EAN600 Item description:...
- Page 26 3. Hardware Version: The boot loader version. 4. Firmware Version: The firmware version. 5. Name: The proper name of the EAN600, default is Network Camera. 6. Firmware location: Location of firmware. 7. Select same segment network card: Please select your local PC’s IP address.
-
Page 27: How To Upgrade Firmware
A. Crossover Cat. 5 cable B. Windows 2000 or later C. Network card on local PC. D. EAN600. Please follow those steps, which at below: Step 1 Set network configuration on you local PC. Please go to “Internet Protocol (TCP/IP) Properties”. -
Page 28: Step 2 Setting Up The Hardware Connection
Step 2 Setting up the Hardware connection. Use a cross-over cat.5 cable to connect to your local PC. Ethernet [RJ-45] Connect to your PC A “Y Cable” Connect to AC Adapter, Please pay attention to “+” and “-“ Power on EAN600, and wait about 3 seconds. - Page 29 EAN600 After hardware connection completed, please Double Click the “CamTool” from your installed path to bring up this upgrading utility. You should be able to see the CamTool Utility appeared:...
- Page 30 EAN600 Figure 3...
-
Page 31: Step 3 Choose The Correct Interface
☆ If you see “0.0.0.0” in the box of “select same segment network card”, you do not have correct connection between your PC and EAN600 camera. Please double check: 1. EAN600’s power is connect correctly and it’s ON. - Page 32 EAN600 Figure 4...
-
Page 33: Step 4 Confirm The Firmware's Location
EAN600 Step 4 Confirm the firmware’s location Make Sure the firmware (.hex file) is located at the same directory of CamTool (See the firmware path to confirm, refer to red mark). Figure 5... -
Page 34: Step 5 Input The Password
Step 5 Input the password Click the “Update firmware” to upgrade.(Please see red mark of figure 6) Input the password (Our Factory default is root or admin, Please refer to figure 7). After you enter password, and wait the EAN600 checking password. Figure 6... - Page 35 EAN600 Figure 7 If the authorization of the password is passed, then the Updating progress bar should be in action status. (Please see red mark of figure 8) Wait until the progress bar is completed. (Please see figure 9) The current progress time should be finish in 30 seconds, and please wait till it...
- Page 36 EAN600 Figure 8...
- Page 37 EAN600 Figure 9 Please press “Exit” button for leaving CamTool and finishing update progress. The completed process steps are: 1. Starting to upgrade firmware. (Figure 6) 2. System ask the enter code for upgrading. (Figure 7) 3. Network camera is upgrading. (Figure 8)
-
Page 38: Troubleshooting
Answer: It means it can not find the firmware on the Firmware locations appear on CamTool. 2. The steps to RESET this EAN600 camera back to manufactory’s setting as: a. Power Off the EAN600 camera b. Connect “RS232 TX” and “RS232 RX” with a wire (marked with red lines in the following pictures) c. - Page 39 EAN600 EverFocus Electronics Corp. Head Office: China Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Room 609, Technology Trade Building, Hsi-Chi, Taipei, Taiwan Shandgdi Information Industry Base, TEL: 886-2-26982334 Haidian District, Beijing, China FAX: 886-2-26982380 TEL: 86-10-62973336~9 http://www.everfocus.com.tw FAX: 86-10-62971432 http://www.everfocus.com.cn...