Ptz Control Window - EverFocus EPN Series User Manual

5.1

PTZ Control Window

Actions Control Buttons
To force the camera to turn to the preconfigured preset position, click the Preset
button, select a Preset number and then click the Go button.
Note: To use this function, you have to set a preset position on the PTZ Settings page.
See 7.5 PTZ.
The following is a list of fixed preset numbers for the actions.
Preset
33:
34:
83-87:
94:
96:
97:
98:
99:
Click to Zoom In / Zoom Out
Click to Focus Near / Focus Far
Click to widen / narrow down the IRIS opening
Click the direction buttons to force the
camera to turn into that direction
Click to stop the current action, such
as Auto Pan, Tour or Pattern
Select a speed for Pan and Tilt
Actions Control Buttons
Action
Flip command. Pans the dome drive 180 degrees.
Pan zero command. Directs the dome drive to the factory-determined
zero reference point.
Reserved.
Reserved.
Stop a scan.
Random scanning.
Frame scanning.
Start auto scanning.
33
EPN4220d/4220di