Xerox ColorQube 9303 Series Service Manual page 1776

Output Transport
Overview
The output transport performs the following functions:
• Delivering printed media to output module, (LCCS, HVF or OCT).
• Returning the duplex media for second-side marking.
• Performing the final inversion on single-side tabs and duplex pre-drilled or pre-printed
stock.
The output transport comprises the following components:
Output transport motor, M5 - A stepper motor, located at the rear of the output transport driving
nip N and nip P via two gears and two toothed belts. Refer to
Exit sensor, 15 - A reflective sensor, located immediately before nip N. The sensor detects
sheets being fed either from nip P or nip L, to nip N. Refer to
Nip N - The exit nip, feeding sheets to the output module. Refer to
Nip P - Used to feed sheets back for second-side marking. Nip P is also used, in conjunction
with the output diverters, in performing the final inversion of single-sided tabs and duplex
drilled or pre-printed sheets. Refer to Figure
Duplex sensor (#13) - A reflective sensor detecting the sheets going for second-side marking.
The sensor also detects the trailing edges of sheets being inverted before being fed to the out-
put module. Refer to Figure 2.
Output diverter solenoid - Before the solenoid is actuated, the diverters are positioned so that
sheets arriving from the post fix transport, or from the horizontal transport, are fed to the output
nip N. When the solenoid is actuated, the diverters are positioned so that sheets from the post
fix transport are fed back to the horizontal transport. Once at the horizontal transport, the
sheets either continue for second-side marking or are fed back for final inversion and output.
Refer to Figure 1.
Output diverters - A set of two diverters, geared together so they can be controlled by the one
output diverter solenoid. Refer to Figure
Jam clearance LEDs - Two LED PWBs, located in the jam clearance door, provide four LEDs
to assist in the jam clearance process. Refer to
Principles of Operation
Figure 1.
Figure 2.
Figure 2.
2.
1.
Figure 2.
Output transport
motor, M5
92T belt
Figure 1 Output transport components 1
February 2013
8-82
REAR VIEW
Output diverter
solenoid
Output diverters
112T belt
ColorQube® 9303 Family