Table of Contents
Advertisement
Figure 15 Stapling components
Paper ejection, pressing and support: Includes all actions necessary to transfer the paper sets
from the compiler to the stacker. When the set is compiled, and the paper pusher and paddle
units have returned to the upper position the ejector unit moves to the out position. The support
fingers move out, taking the pressing fingers down to hold the previous set in place on the
stacker. The ejector roll motor turns the belts and the ejector fingers push the set out to the
stacker. The pressing and support fingers then return to the home position. The ejector fingers
are carried round on the belts to their home position as the ejector unit moves back to its home
position. The components associated with these functions are:
ColorQube® 9303 Family
Stapler unit mid home sensor
(Q12-176)
Stapler home sensor
(Q12-135)
February 2013
•
Ejector motor, MOT12-236 - A DC motor, located at the front underside of the ejector unit.
This motor moves the ejector unit to the 'out' and 'home' positions. Refer to
•
Ejector motor encoder sensor, Q12-096 - A standard flag, encoder-disc sensor, sensing
the rotation of the ejector unit motor. Refer to
•
Ejector out sensor, Q12-185 - A flag sensor that senses the ejector unit in the out position.
Refer to
Figure
16.
•
Ejector home sensor, Q12-184 - A flag sensor that senses the ejector unit in the home
position. Refer to
Figure
16.
8-101
Figure
16.
Figure
16.
Principles of Operation
Advertisement
Chapters
Table of Contents
