Table 8. Events that automatically notify Support (continued)
Event ID
806f0813-2582xxxx
806f0813-2584xxxx
POST
When you turn on the server, it performs a series of tests to check the operation of the server components
and some optional devices in the server. This series of tests is called the power-on self-test, or POST.
If a power-on password is set, you must type the password and press Enter, when you are prompted, for
POST to run.
POST error codes
The following table describes the POST error codes and suggested actions to correct the detected
problems.
These errors can appear as severe, warning, or informational.
Message String
A Uncorrectable Bus Error has occurred on system
[ComputerSystemElementName]. (PCIs)
A Uncorrectable Bus Error has occurred on system
[ComputerSystemElementName]. (CPUs)
Automatically
Notify Support
Yes
Yes
.
Chapter 3
Diagnostics
305