Table of Contents
Advertisement
Severity
Error
Serviceable
Yes
Automatically notify support
Yes
Alert Category
Critical - CPU
SNMP Trap ID
40
CIM Information
Prefix: PLAT ID: 0044
User Response
1. Make sure that the latest levels of firmware and device drivers are installed for all adapters and
standard devices, such as Ethernet, SCSI, and SAS. Important: Some cluster solutions require
specific code levels or coordinated code updates. If the device is part of a cluster solution, verify that
the latest level of code is supported for the cluster solution before you update the code. 2. Update the
firmware (UEFI and IMM) to the latest level (Updating the firmware). 3. Run the DSA program. 4.
Reseat the adapter. 5. Replace the adapter. 6. (Trained technician only) Replace microprocessor n. 7.
(Trained technician only) Replace the system board. (n = microprocessor number)
• 806f0207-0302xxxx : [ProcessorElementName] has Failed with FRB1/BIST condition. (CPU 2)
This message is for the use case when an implementation has detected a Processor Failed - FRB1/BIST
condition.
May also be shown as 806f02070302xxxx or 0x806f02070302xxxx
Severity
Error
Serviceable
Yes
Automatically notify support
Yes
Alert Category
Critical - CPU
SNMP Trap ID
40
CIM Information
Prefix: PLAT ID: 0044
User Response
1. Make sure that the latest levels of firmware and device drivers are installed for all adapters and
standard devices, such as Ethernet, SCSI, and SAS. Important: Some cluster solutions require
specific code levels or coordinated code updates. If the device is part of a cluster solution, verify that
the latest level of code is supported for the cluster solution before you update the code. 2. Update the
firmware (UEFI and IMM) to the latest level (Updating the firmware). 3. Run the DSA program. 4.
Reseat the adapter. 5. Replace the adapter. 6. (Trained technician only) Replace microprocessor n. 7.
(Trained technician only) Replace the system board. (n = microprocessor number)
.
Chapter 3
Diagnostics
121
Advertisement
Table of Contents
