Table of Contents
Advertisement
User Response
No action; information only.
• 816f040c-2012xxxx : [PhysicalMemoryElementName] Enabled on Subsystem
[MemoryElementName]. (DIMM 18)
This message is for the use case when an implementation has detected that Memory has been Enabled.
May also be shown as 816f040c2012xxxx or 0x816f040c2012xxxx
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0130
User Response
No action; information only.
• 816f040c-2581xxxx : [PhysicalMemoryElementName] Enabled on Subsystem
[MemoryElementName]. (All DIMMS)
This message is for the use case when an implementation has detected that Memory has been Enabled.
May also be shown as 816f040c2581xxxx or 0x816f040c2581xxxx
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0130
User Response
No action; information only. One of the DIMMs :
• 816f0413-2582xxxx : A PCI PERR recovery has occurred on system
[ComputerSystemElementName]. (PCIs)
This message is for the use case when an implementation has detected a PCI PERR recovered.
System x3550 M3Problem Determination and Service Guide
266
Advertisement
Table of Contents
