Table of Contents
Advertisement
Serviceable
Yes
Automatically notify support
Yes
Alert Category
Critical - Hard Disk drive
SNMP Trap ID
5
CIM Information
Prefix: PLAT ID: 0164
User Response
1. Run the hard disk drive diagnostic test on drive n. 2. Reseat the following components: a. Hard disk
drive (wait 1 minute or more before reinstalling the drive) b. Cable from the system board to the
backplane 3. Replace the following components one at a time, in the order shown, restarting the
server each time: a. Hard disk drive b. Cable from the system board to the backplane c. Hard disk
drive backplane (n = hard disk drive number)
• 806f010d-0404xxxx : The Drive [StorageVolumeElementName] has been disabled due to a detected
fault. (Drive 4)
This message is for the use case when an implementation has detected a Drive was Disabled due to fault.
May also be shown as 806f010d0404xxxx or 0x806f010d0404xxxx
Severity
Error
Serviceable
Yes
Automatically notify support
Yes
Alert Category
Critical - Hard Disk drive
SNMP Trap ID
5
CIM Information
Prefix: PLAT ID: 0164
User Response
1. Run the hard disk drive diagnostic test on drive n. 2. Reseat the following components: a. Hard disk
drive (wait 1 minute or more before reinstalling the drive) b. Cable from the system board to the
backplane 3. Replace the following components one at a time, in the order shown, restarting the
server each time: a. Hard disk drive b. Cable from the system board to the backplane c. Hard disk
drive backplane (n = hard disk drive number)
• 806f010d-0405xxxx : The Drive [StorageVolumeElementName] has been disabled due to a detected
fault. (Drive 5)
This message is for the use case when an implementation has detected a Drive was Disabled due to fault.
May also be shown as 806f010d0405xxxx or 0x806f010d0405xxxx
Severity
Error
.
Chapter 3
Diagnostics
113
Advertisement
Table of Contents
