Table of Contents
Advertisement
Figure 123. Installation tool handle adjustment
g.
Align the microprocessor alignment slots with the alignment pins on the microprocessor
installation tool and place the microprocessor on the underside of the tool so that the tool can
grasp the microprocessor correctly.
Alignment
pin slots
Alignment
pins
Figure 124. Microprocessor alignment
h.
Twist the handle of the installation tool clockwise to secure the microprocessor in the tool.
Note: You can pick up or release the microprocessor by twisting the microprocessor
installation tool handle.
Handle
Installation tool
Figure 125. Installation tool handle adjustment
i.
Carefully align the microprocessor installation tool over the microprocessor socket.
Attention: The microprocessor fits only one way on the socket. You must place a
microprocessor straight down on the socket to avoid damaging the pins on the socket. The
pins on the socket are fragile. Any damage to the pins may require replacing the system board.
System x3550 M3Problem Determination and Service Guide
504
Microprocessor
Installation tool
Advertisement
Table of Contents
