Table of Contents
Advertisement
Yes
Automatically notify support
No
Alert Category
Warning - CPU
SNMP Trap ID
42
CIM Information
Prefix: PLAT ID: 0038
User Response
1. Make sure that the fans are operating, that there are no obstructions to the airflow (front and rear of
the server), that the air baffles are in place and correctly installed, and that the server cover is installed
and completely closed. 2. Check the ambient temperature. You must be operating within the
specifications. 3. Make sure that the heat sink for microprocessor n is installed correctly. 4. (Trained
technician only) Replace microprocessor n. (n = microprocessor number)
• 806f0a07-0302xxxx : [ProcessorElementName] is operating in a Degraded State. (CPU 2)
This message is for the use case when an implementation has detected a Processor is running in the
Degraded state.
May also be shown as 806f0a070302xxxx or 0x806f0a070302xxxx
Severity
Warning
Serviceable
Yes
Automatically notify support
No
Alert Category
Warning - CPU
SNMP Trap ID
42
CIM Information
Prefix: PLAT ID: 0038
User Response
1. Make sure that the fans are operating, that there are no obstructions to the airflow (front and rear of
the server), that the air baffles are in place and correctly installed, and that the server cover is installed
and completely closed. 2. Check the ambient temperature. You must be operating within the
specifications. 3. Make sure that the heat sink for microprocessor n is installed correctly. 4. (Trained
technician only) Replace microprocessor n. (n = microprocessor number)
• 81010002-2801xxxx : Numeric sensor [NumericSensorElementName] going low (lower non-critical)
has deasserted. (CMOS Battery)
This message is for the use case when an implementation has detected a Lower Non-critical sensor going
low has deasserted.
May also be shown as 810100022801xxxx or 0x810100022801xxxx
Severity
Info
System x3550 M3Problem Determination and Service Guide
190
Advertisement
Table of Contents
