Oui Settings; Port Settings - TRENDnet TL2-F7120 User Manual

12-port 10g layer 2 managed sfp+ switch
Table of Contents

Advertisement

TRENDnet User's Guide
Remark CoS / 802.1p - This parameter is CoS priority level assigned to the voice
data packets received on each voice VLAN port. For the COS priority to be
effective, 802.1p Remark must be Enabled.
Aging Time - This parameter indicates the amount of time, in hours, after the
last IP phone's OUI was received on a port, after which this port will be
removed from the voice VLAN. The range is 30 to 1440.
4. Click Apply to save the settings.

OUI Settings

Network > Voice VLAN > OUI Settings
1. Log into your switch management page (see
on page 9).
2. Click on Network, click on Voice VLAN, and click on OUI Settings.
3. Select from the table to use a pre-defined OUI. To modify a pre-defined OUI, click Edit
on the far right of the table. To delete an OUI from this table, select the OUI Index and
click Delete.
© Copyright 2023 TRENDnet. All Rights Reserved.
"Access your switch management
page"
4. To add a new OUI to the table, click on Add.
5. Input the OUI Address and the name of your OUI. Click Apply to save it to the OUI
settings table.

Port Settings

Network > Voice VLAN > Port Settings
1. Log into your switch management page (see
on page 9).
2. Click on Network, click on Voice VLAN, and click on Port Settings.
3. Select the port and click Edit to configure the settings of that port.
4. Review the settings and click Apply to save your settings to the flash.
State – Select Enabled to enable COS mode or Disabled to disable this feature.
CoS Mode – Select Src mode or All
TL2-F7120
"Access your switch management
page"
49

Advertisement

Table of Contents
loading

Table of Contents