Table of Contents
Advertisement
TRENDnet User's Guide
Command Objective
✏
Syntax
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
This command sets the IGMP snooping report-suppression time interval. The
switch forwards IGMPv2 report message to the multicast group. A timer is
started immediately after forwarding the report message and runs for set
period of time. During this interval the switch does not forward another
IGMPv2 report message addressed to the same multicast group to the router
ports.
The no form of the command sets the IGMP snooping report-
suppression interval time to the default value.
The ip igmp snooping report-suppression-interval is used only when the
proxy and proxy-reporting are disabled.
ip igmp snooping report-suppression-interval <(1 – 25) seconds>
no ip igmp snooping report-suppression-interval
Global Configuration Mode
TL2-F7120
Advertisement
Table of Contents
