TRENDnet User's Guide
Command Objective
✏
Syntax
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
This command sets the time period with which the general queries are sent
by the IGMP snooping switch when configured as querier on a VLAN. The
value range is between 60 to 600 seconds.
The no form of the command sets the IGMP querier interval to default value.
The switch must be configured as a querier for this configuration to be
imposed.
ip igmp snooping query-interval <(60 - 600) seconds>
no ip igmp snooping query-interval
Config-VLAN Mode
TL2-F7120