Table of Contents
Advertisement
TRENDnet User's Guide
VLAN Settings
Network > IGMP Snooping > VLAN Settings
1. Log into your switch management page (see
on page 9).
2. Click on Network, click on IGMP Snooping, and click on VLAN Settings.
3. Select the VLAN ID to configure
4. Review the settings. Click Apply to save the settings.
•
IGMP Snooping Status – Click the drop-down list and select Enabled to enable
the IGMP snooping or Disabled to disable the feature
•
Version – Click the drop-down list and select IGMP version
Querier Settings
Network > IGMP Snooping > Querier Settings
© Copyright 2023 TRENDnet. All Rights Reserved.
"Access your switch management
page"
1. Log into your switch management page (see
on page 9).
2. Click on Network, click on IGMP Snooping, and click on Querier Settings.
3. Select the VLAN ID to configure
4. Review the settings. Click Apply to save the settings.
•
Querier State – Click the drop-down list and select Enabled to enable the
Querier Status or Disabled to disable this feature.
•
Interval – Enter the amount of time you want your switch to send IGMP
queries.
Max Response Interval- Specifies the maximum time before sending a
•
response report.
Startup Query Counter – Enter the amount to start the query counter
•
•
Startup Query Interval – Enter the amount of time to start the query counter
TL2-F7120
"Access your switch management
page"
44
Advertisement
Table of Contents
