TRENDnet TL2-F7120 User Manual page 118

TRENDnet User's Guide
Command Objective
Syntax
Parameter Description
Mode
4.1.33 show port-isolation status
Command Objective
Syntax
Copyright 2023 TRENDnet. All Rights Reserved.
This command set the status of the traffic to be allowed in these
configured egress ports when the ingress is this interface.
port-isolation {enable|disable}
•
enabled - Enables the Port Isolation rule in this ingress interface.
•
disabled - Disables the Port Isolation rule in this ingress interface.
Interface Configuration
This command displays the Port Isolation table.
show port-isolation status
TL2-F7120