TRENDnet TL2-F7120 User Manual page 266

TRENDnet User's Guide
4.1.92 dot1x max-req
Command Objective
Syntax
Mode
4.1.91
dot1x max-start
Command Objective
Copyright 2023 TRENDnet. All Rights Reserved.
This command sets the maximum number of EAP (Extensible
Authentication Protocol) retries to the client by the authenticator
before restarting authentication process. The count value ranges
between 1 and 10.
dot1x max-req <count(1-10)>
no dot1x max-req
Interface Configuration Mode
This command sets the maximum number of EAPOL retries to the
authenticator.The value range is 1 to 65535.
TL2-F7120