TRENDnet TL2-F7120 User Manual page 323

TRENDnet User's Guide
4.1.180 snmp engineid
Command Objective
Syntax
Mode
4.1.181
snmp view
Copyright 2023 TRENDnet. All Rights Reserved.
This command configures the engine ID that is utilized as a unique identifier of
a SNMPv3 engine. This engine ID is used to identify a source SNMPv3 entity
and a destination SNMPv3 entity to coordinate the exchange of messages
between the source and the destination.
The no form of the command resets the engine ID to the default value.
snmp engineid <EngineIdentifier> no
snmp engineid
Global Configuration Mode
TL2-F7120