TRENDnet User's Guide
66
deny icmpv6
Command Objective
Syntax
Parameter
Description
Copyright 2023 TRENDnet. All Rights Reserved.
This command specifies the IPv6 TCP packets to be forwarded based on the
associated parameters.
•
deny icmpv6 {any | host <ip6_addr> <integer(0-128)>} {any | host
<ip6_addr> <integer(0-128)>} ace-priority <integer (1- 2147483647)>
[type <short(0-255)>] [code <short(0-255)>] [dscp
<short(0-63)>]
•
icmpv6
- Internet Control Message Protocol.
•
any | host <ip6_addr> <integer(0-128)>
/ any host
•
eq <short (1-65535)>
- Port Number.
•
any | host <ip6_addr> <integer(0-128)>
host / any host.
•
ace-priority <integer (1-2147483647)>
used to decide which filter rule is applicable when the packet
matches with more than one filter rules.
•
type <short (0-255)>
-
message type
•
code <short (0-255)>
- message code
•
dscp <short (0-63)>
- Differentiated services code point provides the
quality of service control.
- Source address of the host
- Destination address of the
- The priority of the filter is
TL2-F7120