TRENDnet TL2-F7120 User Manual page 173

TRENDnet User's Guide
Command Objective
Syntax
Parameter
Description
Copyright 2023 TRENDnet. All Rights Reserved.
This command specifies the packets to be rejected based on the MAC
address and the associated parameters.
•
deny { any | <src-mac-address > } { any | host <mac_addr> } {ace-
priority <integer (1-2147483647)>} [ ethertype <integer (1- 65535)> ] [
vlan <integer (1-4094)>] [ vlan-priority <short (0-7)> ]
•
any | host <src-mac-address >
matched with the packet
•
any | host <dest-mac-address >
matched with the packet
•
ace-priority <integer (1-2147483647)>
to decide which filter rule is applicable when the packet matches with
more than one filter rules.
•
ethertype <integer (1-65535)>
type to be filtered.
•
vlan <integer (1-4094)> - VLAN value to match against incoming
packets.
•
vlan-priority <short (0-7)> - VLAN priority value to match against
incoming packets.
- Source MAC address to be
- Destination MAC address to be
- The priority of the filter is used
- Specifies the non-IP protocol
TL2-F7120