Table of Contents
Advertisement
TRENDnet User's Guide
Command Objective
Syntax
Parameter
Description
Mode
4.1.126
monitor session - source
Copyright 2023 TRENDnet. All Rights Reserved.
This command configures a destination port for a mirroring session.
The no form of the command removes the destination port
configuration of the mirroring session.
monitor session <session-id (1-3)> destination { interface <interface- type>
<interface-id>} [allow-ingress]
no monitor session <session-id (1-3)> destination { interface <interface- type>
<interface-id>}
•
session-id
- Specifies the index of the mirroring session. This value
ranges between 1 and 3.
•
interface
- Specifies the destination port for the mirroring session.
■
<interface-type>
- Interface type. This can be:
GigabitEthernet or or Port Channel.
■
<interface-id>
– Interface identifier. This is a combination of
slot number and port number.
•
allow-ingress- Allow Packets Ingress to Destination Port.
Global Configuration Mode
TL2-F7120
Advertisement
Table of Contents
