TRENDnet User's Guide
Parameter
Description
Copyright 2023 TRENDnet. All Rights Reserved.
•
src-mac
- Distributes the load based on the source MAC address.
The bits of the source MAC address in the packet are used to select
the port in which the traffic should flow. Packets from different
hosts use different ports in the channel, but packets from the same
host use the same port.
•
dest-mac
- Distributes the load based on the destination host
MAC address. The bits of the destination MAC address in the packet are
used to select the port in which the traffic should flow. Packets to the
same destination are sent on the same port, but packets to different
destinations are sent on different ports in the channel
•
src-dest-mac
- Distributes the load based on the source and
destination MAC address. The bits of the source and destination MAC
address in the packet are used to select the port in which the traffic
should flow.
•
src-ip
- Distributes the load based on the source IP address. The
bits of the source IP address in the packet are used to select the port
in which the traffic should flow.
•
dest-ip
- Distributes the load based on the destination IP address.
The bits of the destination IP address in the packet are used to select
the port in which the traffic should flow.
•
src-dest-ip
- Distributes the load based on the source and
destination IP address. The bits of the source and destination IP
address in the packet are used to select the port in which the traffic
should flow.
•
dest-l4-port
- Distributes the load based on the destination Layer
TL2-F7120