TRENDnet TL2-F7120 User Manual page 207

TRENDnet User's Guide
Command Objective
Syntax
Mode
4.1.106 ipv6 enable
Command Objective
Copyright 2023 TRENDnet. All Rights Reserved.
This command enables unicast routing which is used for one to one
communication across the ipv6 internet. An IPv6 unicast address is an
identifier for a single interface, on a single node. A packet that is sent to a
unicast address is delivered to the interface identified by that address.
ipv6 unicast-routing
no ipv6 unicast-routing
Interface Configuration Mode
This command enables IPv6 processing on an interface that has not been
configured with an explicit IPv6 address.
TL2-F7120