TRENDnet User's Guide
Command Objective
Syntax
Parameter
Description
Mode
Copyright 2023 TRENDnet. All Rights Reserved.
Used to diagnose the copper cable. If there is an error on the cable, it can
determine the type of error and the position where the error
occurred.
show interface cable-diag Gigabitethernet [<iftype> <ifnum>]
•
OK- This pair has been connected to partner network device and the
link is up.
OPEN–This pair is left open.
SHORT–This pair has been shorted between two lines of its own.
Unknown–The last diagnosis do not obtain the cable' status,
please try it again.
Privileged EXEC Mode
TL2-F7120