Configure Voice Vlan Oui Settings - TRENDnet TPE-P521ES User Manual

TRENDnet User's Guide
2. Click Continue to return to the Web Configuration of your switch.

Configure Voice VLAN OUI settings

Network > Voice VLAN > OUI
1. Log into your switch management page (see
on page 7).
2. Click on Network, Voice VLAN, and click on OUI.
3. Review the settings.

Select either a Default OUI (partially pre-filled fields for popular manufacturers
of VOIP phones) or User defined OUI where you may enter a text description
that helps you identify the manufacturer's OUI in the User Defined OUI -
Description field.

Enter the MAC address in the Telephony OUI field of one of the IP phones with
the manufacturer's OUI.

Click Add. The new OUI entry is displayed in the table at the bottom of the
page.
Note: If you find more than one OUI among the IP phones you are installing,
enter one MAC address that represents each individual OUI. You can enter a
total of 5 OUIs.
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access your switch management page"
Modify OUI Setting
To modify or delete an OUI, it must be first be deleted and then re-created.
Delete OUI Setting
To delete a specific OUI that had already been entered in the table at the bottom of the
page, click on Delete in the Action column of the table. The specific OUI will be deleted
from the table.
NOTE: The configured settings are only applied to the switch's temporary memory and
will be lost upon the next power-cycle. Please follow these next steps to save the
configurations to the switch's NV-RAM to ensure the settings will remain throughout
power-cycles and reboots:
1. From the menu on the left: click on Save, then click the blue button Save
Settings to Flash.
TPE-P521ES
39